JS Pump RSD 150 Pump Puddle Buddy Low Level Pump 230v 120 Lpm 7 Hm fitted with REKA 2000 Water Level Regulator

The RSD 150 Pump is an all round semi professional and highly portable residue pump, designed for clean water in domestic applications for example, rooms, garages and cellars. Requires a minimum of 5mm of water to operate, prime and start to pump. One inch male top outlet complete with 1" 3/4" 1/2" step adapter female hose tail. Plastic outer cover, lower motor/bearing housing, impeller, pump housing and strainer. Single silicon mechanical seal in a lubricated chamber with a single oil seal in the media. Complete with ten metres of power cable. These pumps must not be installed/left laying on their side. Drains down to 1mm.

- Voltage - 230v

- Power - 0.15kw

- Max flow Lpm - 120

- Max head - 7

- Self vents due to anti airlock valve

- Ideal for limited space

The Reka2000 level regulator is a device that controls equipment once it has reached a pre-established level. A capacity sensor is integrated in the plastic structure and this makes it suitable for a wide range of liquids. (Note - oils, fats and grease are not recommended as they act as an insulator). It can be operated by mains electricity and, due to the internal relay, it is able to control pumps up to 0.75kw/1 HP.It is easy to install near the pump itself, thanks to two holes on the structure, or by using the short cable fitted with the cab tyre type cable entry, can be fitted to the JS single phase pumps as a integral unit. On the inside of the regulator there are two LEDs for various controls which are visible through the plastic container. The first LED at the bottom which turns on when the low level has been reached. The second LED turns on when the high level has been reached or at the same time when the relay has been reached or at the same time when the relay has been activated.