REKA2000 Capacitative Level Controller for JS Pumps 020-004 230v
The Reka2000 level regulator is a device that controls equipment once it has reached a pre-established level. A capacity sensor is integrated in the plastic structure and this makes it suitable for a wide range of liquids. (Note - oils, fats and grease are not recommended as they act as an insulator). It can be operated by mains electricity and, due to the internal relay, it is able to control pumps up to 0.75kw/1 HP.It is easy to install near the pump itself, thanks to two holes on the structure, or by using the short cable fitted with the cab tyre type cable entry, can be fitted to the JS single phase pumps as a integral unit. On the inside of the regulator there are two LEDs for various controls which are visible through the plastic container. The first LED at the bottom which turns on when the low level has been reached. The second LED turns on when the high level has been reached or at the same time when the relay has been reached or at the same time when the relay has been activated.2 KG
H270 X W80 X L35mm
230v
0.75kW/1.0hp
0.4M cable
4 amps max
When ordering make it clear if you want the float switch fitted to a pump or as a loose spare part. Use the comments panel when checking out.
REKA2000 Capacitative Level Controller for JS Pump Submersible Electric Pumps 230v
- Brand: MAC 3 Water Systems S.p.a
- Product Code: REKA2000 Capacitative Level Controller for JS Pumps 020-004 230v
-
£80.00