JS Pump RSD 150 Pump Puddle Buddy Low Level Pump 230v 120 Lpm 7 Hm fitted with Crab Probe

The RSD 150 Pump is an all round semi professional and highly portable residue pump, designed for clean water in domestic applications for example, rooms, garages and cellars. Requires a minimum of 5mm of water to operate, prime and start to pump. One inch male top outlet complete with 1" 3/4" 1/2" step adapter female hose tail. Plastic outer cover, lower motor/bearing housing, impeller, pump housing and strainer. Single silicon mechanical seal in a lubricated chamber with a single oil seal in the media. Complete with ten metres of power cable. These pumps must not be installed/left laying on their side. Drains down to 1mm.

- Voltage - 230v

- Power - 0.15kw

- Max flow Lpm - 120

- Max head - 7

- Self vents due to anti airlock valve

- Ideal for limited space

Crab Probe

- Low level probe with a programmable start / stop delay

- Turn your puddle pumps automatic while maintaining their low level pumping attributes.

- The Crab will turn on after 'X' seconds of detecting water and continue pumping for 'Y' seconds after the detection of water is lost by the probe. 

- (Where X and Y are programmed by the user) Enables low level pumps to continue pumping for up to 2 minutes

- Programming is done via the supplied magnetic key

Allow 2 days delivery for this item needs to be fitted in our workshop